- location of the visitor¡¦s home ¡¦ how far they traveled to the site
- how many times they visited the site in the past year or season
- the length of the trip
- the amount of time spent at the site
- travel expenses
- the person¡¦s income or other information on the value of their time
- other socioeconomic characteristics of the visitor
- other locations visited during the same trip, and amount of time spent at each
- other reasons for the trip (is the trip only to visit the site, or for several purposes)
- fishing success at the site (how many fish caught on each trip)
- perceptions of environmental quality or quality of fishing at the site
- substitute sites that the person might visit instead of this site
- The value of improvements in water quality was only shown to increase the value of current beach use. However, improved water quality can also be expected to increase overall beach use.
- Estimates ignore visitors from outside the Baltimore-Washington statistical metropolitan sampling area.
- The population and incomes in origin zones near the Chesapeake Bay beach areas are increasing, which is likely to increase visitor-days and thus total willingness to pay.
- changes in access costs for a recreational site
- elimination of an existing recreational site
- addition of a new recreational site
- changes in environmental quality at a recreational site
- number of visits from each origin zone (usually defined by zipcode)
- demographic information about people from each zone
- round-trip mileage from each zone
- travel costs per mile
- the value of time spent traveling, or the opportunity cost of travel time
- exact distance that each individual traveled to the site
- exact travel expenses
- substitute sites that the person might visit instead of this site, and the travel distance to each
- quality of the recreational experience at the site, and at other similar sites (e.g., fishing success)
- perceptions of environmental quality at the site
- characteristics of the site and other, substitute, sites
- The travel cost method closely mimics the more conventional empirical techniques used by economists to estimate economic values based on market prices.
- The method is based on actual behavior¡¦what people actually do¡¦rather than stated willingness to pay¡¦what people say they would do in a hypothetical situation.
- The method is relatively inexpensive to apply.
- On-site surveys provide opportunities for large sample sizes, as visitors tend to be interested in participating.
- The results are relatively easy to interpret and explain.
- The travel cost method assumes that people perceive and respond to changes in travel costs the same way that they would respond to changes in admission price.
- The most simple models assume that individuals take a trip for a single purpose ¡¦ to visit a specific recreational site. Thus, if a trip has more than one purpose, the value of the site may be overestimated. It can be difficult to apportion the travel costs among the various purposes.
- Defining and measuring the opportunity cost of time, or the value of time spent traveling, can be problematic. Because the time spent traveling could have been used in other ways, it has an "opportunity cost." This should be added to the travel cost, or the value of the site will be underestimated. However, there is no strong consensus on the appropriate measure¡¦the person¡¦s wage rate, or some fraction of the wage rate¡¦and the value chosen can have a large effect on benefit estimates. In addition, if people enjoy the travel itself, then travel time becomes a benefit, not a cost, and the value of the site will be overestimated.
- The availability of substitute sites will affect values. For example, if two people travel the same distance, they are assumed to have the same value. However, if one person has several substitutes available but travels to this site because it is preferred, this person¡¦s value is actually higher. Some of the more complicated models account for the availability of substitutes.
- Those who value certain sites may choose to live nearby. If this is the case, they will have low travel costs, but high values for the site that are not captured by the method.
- Interviewing visitors on site can introduce sampling biases to the analysis.
- Measuring recreational quality, and relating recreational quality to environmental quality can be difficult.
- Standard travel cost approaches provides information about current conditions, but not about gains or losses from anticipated changes in resource conditions.
- In order to estimate the demand function, there needs to be enough difference between distances traveled to affect travel costs and for differences in travel costs to affect the number of trips made. Thus, it is not well suited for sites near major population centers where many visitations may be from "origin zones" that are quite close to one another.
- The travel cost method is limited in its scope of application because it requires user participation. It cannot be used to assign values to on-site environmental features and functions that users of the site do not find valuable. It cannot be used to value off-site values supported by the site. Most importantly, it cannot be used to measure nonuse values. Thus, sites that have unique qualities that are valued by non-users will be undervalued.
- As in all statistical methods, certain statistical problems can affect the results. These include choice of the functional form used to estimate the demand curve, choice of the estimating method, and choice of variables included in the model.
- GolfSW.com - Golf Southwest tips and reviews.
- VivEcuador.com - Ecuador travel information.
- TheChicagoTraveler.com - Explore Chicago.
- FarmingtonValleyVisit.com - Discover Connecticut's Farmington Valley.
Academia.edu no longer supports Internet Explorer.
To browse Academia.edu and the wider internet faster and more securely, please take a few seconds to upgrade your browser .
Enter the email address you signed up with and we'll email you a reset link.
- We're Hiring!
- Help Center
![travel cost method pdf paper cover thumbnail](https://0.academia-photos.com/attachment_thumbnails/52141010/mini_magick20190123-22825-11zcbo7.png?1548275787)
![](http://playon.fun/777/templates/cheerup/res/banner1.gif)
Environmental Valuation: The Travel Cost Method
![travel cost method pdf Profile image of Philip Graves](https://0.academia-photos.com/61464925/18252106/18226402/s65_philip.graves.jpg)
Related Papers
isabel mendes
![travel cost method pdf travel cost method pdf](https://a.academia-assets.com/images/loswp/related-pdf-icon.png)
Working Papers
Journal of Leisure Research
John Loomis
Mahidi Hasan kawsar , Muha Abdullah Al Pavel , Md Abdullah Al Mamun
Estimation of recreational benefits is an important tool for both biodiversity conservation and ecotourism development in national parks and sanctuaries. The design of this work is to estimate the recreational value and to establish functional relationship between travel cost and visitation of Lawachara National Park (LNP) in Bangladesh. This study employed zonal approach of the travel cost method. The work is grounded on a sample of 422 visitors of the LNP. Results showed that the total value of environmental assets of the LNP is 55,694,173 Taka/Year. Moreover, our suggestion based on visitors' willingness to pay is that the park entrance fee of 25 Tk per person should be introduced that could generate revenue approximate 2.3 million Taka/ year, beneficial for the park management and conservation of biodiversity.
International Journal of Academic Research in Business and Social Sciences
Kamarul Ismail
Journal of Agricultural and Applied Economics
Clement Tisdell
Discusses the implications of the economic valuation of natural resources used for tourism and relates this valuation to the concept of total economic valuation. It demonstrates how applications of the concept of total economic valuation can be supportive of the conservation of natural resources used for tourism. Techniques for valuing tourism’s natural resources are then outlined and critically evaluated. Consideration is given to travel cost methods, contingent valuation methods, and hedonic pricing approaches before concentrating on current developments of valuation techniques, such as choice modelling. The general limitations of existing methods are considered and it is argued that more attention should be given to developing guidelines that will identify ‘optimally imperfect methods’. An overall assessment concludes this article.
Baptême et baptistères entre Antiquité tardive et Moyen Âge. Actes du colloque international qi s'est tenu à Paris, a Sorbonne Université, les 12-13 novembre 2020
Cristina Godoy Fernández
This contribution is intended to highlight the many unanswered questions that arise in the historical-liturgical-archaeological interpretation of the Christian sites of late antiquity in Hispania. In Christian archaeological research, it is essential to gather all the material evidence that shows the Christianization of a given monument. The presence of a baptistery is an indisputable sign that we are dealing with a church, understood as a building for worship. And, once the 'Christianization' of a cult building has been recognized, we must add the lack of clear guidelines that would allow us to identify it as a monastery. This fact leads us to ask the question of this paper: What role did monastic communities play in the Christianization of the countryside? Were they able to assume the competences of the cura animarum at some point in late Hispanic antiquity? How are we to understand the presence or absence of a baptistery? In other words, does the basilica with a baptistery rule it out as a monastic enclave?
Jochem Kahl
Dany Rosepta
admin : Cantik-ku https://cantik-ku.com/ https://cantik-ku.com/product-category/jaket-pria/ https://cantik-ku.com/jaket-casual-pria/
RELATED PAPERS
olal Derrick
ON SALT, COPPER AND GOLD. THE ORIGINS OF EARLY MINING AND METALLURGY IN THE CAUCASUS. Proceedings of the conference held in Tbilisi (Georgia), June 16th-19th 2016 edited by Catherine Marro and Thomas Stöllner
Anthony Harding
Asiya Donald
Archeologie ve středních Čechách
Roman Bortel , Martin Vyšohlíd
Ivan S Daraktchiev
Ibridi ferraresi
Giuseppe Scandurra
Marcelo Vieira da Silva
Matrik : Jurnal Manajemen, Strategi Bisnis dan Kewirausahaan
Rizky Fauzan
Nabila Cherkaoui
Diana Caceres
Essam Gubat
Gerson Mejía
Magistrorum et Scholarium: Jurnal Pengabdian Masyarakat
Adinda Damayanti
Maizatul Haizan Mahbob
Journal of Mathematical Modeling
Sunil kumbhar
Niki Chatzipanagiotou
Journal of Ichthyology
Ramazan Yazıcı
Network and Distributed System Security Symposium
David Farber
Physical Review C
George Lolos
Boletín de Investigaciones Marinas y Costeras
LUZ MARLENY GARCIA ECHAVARRIA
办理bu毕业证书 贝翰文大学毕业证学位证书范本原版一模一样
INPUD Secretariat
Mauro Guarinieri
- We're Hiring!
- Help Center
- Find new research papers in:
- Health Sciences
- Earth Sciences
- Cognitive Science
- Mathematics
- Computer Science
- Academia ©2024
Environmental Justice Organisations, Liabilities and Trade
Mapping environmental justice.
- Nuclear Energy
- Oil and Gas and Climate Justice
- Biomass and Land Conflicts
- Mining and Ship Breaking
- Environmental Health and Risk Assessment
- Liabilities and Valuation
- Law and Institutions
- Consumption, Ecologically Unequal Exchange and Ecological Debt
Travel-cost method
The travel-cost method (TCM) is used for calculating economic values of environmental goods. Unlike the contingent valuation method, TCM can only estimate use value of an environmental good or service. It is mainly applied for determining economic values of sites that are used for recreation, such as national parks. For example, TCM can estimate part of economic benefits of coral reefs, beaches or wetlands stemming from their use for recreational activities (diving and snorkelling/swimming and sunbathing/bird watching). It can also serve for evaluating how an increased entrance fee a nature park would affect the number of visitors and total park revenues from the fee. However, it cannot estimate benefits of providing habitat for endemic species.
TCM is based on the assumption that travel costs represent the price of access to a recreational site. Peoples’ willingness to pay for visiting a site is thus estimated based on the number of trips that they make at different travel costs. This is called a revealed preference technique, because it ‘reveals’ willingness to pay based on consumption behaviour of visitors.
The information is collected by conducting a survey among the visitors of a site being valued. The survey should include questions on the number of visits made to the site over some period (usually during the last 12 months), distance travelled from visitor’s home to the site, mode of travel (car, plane, bus, train, etc.), time spent travelling to the site, respondents’ income, and other socio-economic characteristics (gender, age, degree of education, etc). The researcher uses the information on distance and mode of travel to calculate travel costs. Alternatively, visitors can be asked directly in a survey to state their travel costs, although this information tends to be somewhat less reliable. Time spent travelling is considered as part of the travel costs, because this time has an opportunity cost. It could have been used for doing other activities (e.g. working, spending time with friends or enjoying a hobby). The value of time is determined based on the income of each respondent. Time spent at the site is for the same reason also considered as part of travel costs. For example, if respondents visit three different sites in 10 days and spend only 1 day at the site being valued, then only fraction of their travel costs should be assigned to this site (e.g. 1/10). Depending on the fraction used, the final benefit estimates can differ considerably.
Two approaches of TCM are distinguished – individual and zonal. Individual TCM calculates travel costs separately for each individual and requires a more detailed survey of visitors. In zonal TCM, the area surrounding the site is divided into zones, which can be either concentric circles or administrative districts. In this case, the number of visits from each zone is counted. This information is sometimes available (e.g. from the site management), which makes data collection from the visitors simpler and less expensive.
The relationship between travel costs and number of trips (the higher the travel costs, the fewer trips visitors will take) shows us the demand function for the average visitor to the site, from which one can derive the average visitor’s willingness to pay. This average value is then multiplied by the total relevant population in order to estimate the total economic value of a recreational resource.
TCM is based on the behaviour of people who actually use an environmental good and therefore cannot measure non-use values. This method is thus inappropriate for sites with unique characteristics which have a large non-use economic value component (because many people would be willing to pay for its preservation just to know that it exists, although they do not plan to visit the site in the future).
The travel-cost method might also be combined with contingent valuation to estimate an economic value of a change (either enhancement or deterioration) in environmental quality of the NP by asking the same tourists how many trips they would make in the case of a certain quality change. This information could help in estimating the effects that a particular policy causing an environmental quality change would have on the number of visitors and on the economic use value of the NP.
For further reading:
Ward, F.A., Beal, D. (2000) Valuing nature with travel cost models. A manual. Edward Elgar, Cheltenham.
Ecosystem valuation [ www.ecosystemvaluation.org/travel_costs.htm ]
This glossary entry is based on a contribution by Ivana Logar
EJOLT glossary editors: Hali Healy, Sylvia Lorek and Beatriz Rodríguez-Labajos
One comment
I quite like reading a post that will make people think. Also, thanks for allowing me to comment!
Browse by Theme
Browse by type.
- Presentations
- Press Releases
- Scientific Papers
Online course
Online course on ecological economics: http://www.ejolt.org/2013/10/online-course-ecological-economics-and-activism/
Privacy Policy | Credits
Advertisement
The Individual Travel Cost Method with Consumer-Specific Values of Travel Time Savings
- Open access
- Published: 24 June 2019
- Volume 74 , pages 961–984, ( 2019 )
Cite this article
You have full access to this open access article
- Mikołaj Czajkowski ORCID: orcid.org/0000-0001-5118-2308 1 ,
- Marek Giergiczny 1 ,
- Jakub Kronenberg 2 &
- Jeffrey Englin 3
11k Accesses
27 Citations
Explore all metrics
The treatment of the opportunity cost of travel time in travel cost models has been an area of research interest for many decades. Our analysis develops a methodology to combine the travel distance and travel time data with respondent-specific estimates of the value of travel time savings (VTTS). The individual VTTS are elicited with the use of discrete choice stated preference methods. The travel time valuation procedure is integrated into the travel cost valuation exercise to create a two-equation structural model of site valuation. Since the travel time equation of the structural model incorporates individual preference heterogeneity, the full structure model provides a travel cost site demand model based upon individualized values of time. The methodology is illustrated in a study of recreational birdwatching, more specifically, visits to a ‘stork village’ in Poland. We show that the usual practice of basing respondents’ VTTS on 1/3 of their wage rate is largely unfounded and propose alternatives—including a separate component of the travel cost survey aimed at valuation of respondents’ VTTS or, as a second best, asking if they wish if their journey was shorter and for those who do—use full hourly wage as an indicator of their VTTS.
Similar content being viewed by others
![travel cost method pdf travel cost method pdf](https://media.springernature.com/w215h120/springer-static/image/art%3A10.1007%2Fs10018-018-0231-z/MediaObjects/10018_2018_231_Fig1_HTML.png)
Convergent validity of alternative dependent variable specifications for individual travel cost models
![travel cost method pdf travel cost method pdf](https://media.springernature.com/w215h120/springer-static/image/art%3A10.1007%2Fs11116-020-10097-w/MediaObjects/11116_2020_10097_Fig1_HTML.png)
A critical appraisal of the use of simple time-money trade-offs for appraisal value of travel time measures
Impact of individual daily travel pattern on value of time.
Avoid common mistakes on your manuscript.
1 Introduction
This analysis proposes a structural model of the travel cost demand approach (TCM) that includes two components. One component is used to estimate the value of travel time for each individual in the sample. The second component incorporates that value of travel time into the travel cost variable that is used in the estimation of the site demand. While the travel cost demand curve is estimated using the widely applied count methodology, the travel time component of the model is based on a discrete choice stated preference method. Our approach avoids arbitrary assumptions about an individual’s value of time in an appealing way. It also allows quite intricate valuations since the stated preference portion of the model can accommodate a wide range of travel modes, time constraints, family situations and other considerations that can affect the value of one’s time when traveling for recreation.
The individual level approach to valuing travel time utilized in this analysis is made possible by relatively recent advances in modeling preference heterogeneity in stated preference studies. The advances allow the derivation of posterior estimates of each individual’s taste parameters . We argue that utilizing individual-specific values of travel time savings, based on respondents’ stated preferences, provides a feasible method for empirically incorporating the value of travel time into travel cost demand studies. Through an empirical illustration we show that the proposed approach is tractable. All it requires is the inclusion of only a few discrete choice experiment (DCE) questions in a TCM survey and a proper econometric treatment.
Our results show that using arbitrary assumptions concerning individuals’ value of travel time savings (VTTS) equal to a given share of their wage rate (e.g., 1/3) are largely unfounded. First of all, nearly half of respondents say they do not wish their journey to the site was shorter, indicating positive utility of leisure travel. Those who wished to shorten the journey were willing to pay amounts which appear only mildly correlated with their estimated wage rates. Overall, the average consumer surplus per trip calculated from the model with individual-specific VTTS were the closest to the model which used respondents’ full wage rate included for respondents who said they wish their journey was shorter (and zero for others). We suggest using this approach as the second best, in the case eliciting individual specific VTTS was not possible.
1.1 Economics of Time: What Do We Know
In 1965 Becker postulated that “time can be converted into money”. The basic idea is that people choose how much labor to supply, given a constraint that total time available is divided among work, leisure, and travel. At its bare bones, this model implies that travel time is valued at the after-tax wage rate. This is because the Becker model assumes that time can be transferred freely between work and leisure, so any marginal savings in travel time can be used to increase labor income. This model has been expanded in many directions. A common starting point is DeSerpa ( 1971 ). This model assumes that utility is affected by commodity bundles \(X = (X_{1} , \ldots ,X_{n} ,T_{1} , \ldots ,T_{n} )\) where \(X_{i}\) denotes some quantity of the i -th good, while \(T_{i}\) denotes the amount of time allocated to the i -th good. These goods can include both travel to a recreational site and time onsite. \(T_{w}\) denotes time spent at work (which may increase or decrease utility). Each activity has a minimum time requirement \(\bar{T}\) (hence constraint \(T_{i} \ge \bar{T}\) ). There is also an overall time constraint \(T_{w} + \sum {T_{i} } \le T^{0}\) . The budget constraint is \(P_{i} X_{i} \le Y + wT_{w}\) , where \(Y\) is unearned income. As a result, the problem can be stated as:
This problem can be solved by formulating a Lagrangian function, in which each constraint is associated with a Lagrange multiplier indicating how tight it is (i.e., the rate at which utility could be increased by relaxing it a little). Let \(\lambda\) , \(\mu\) , and \(\kappa\) be the Lagrangian multipliers for the budget constraint, the overall time constraint, and the activity-specific time constraints, respectively. The solution to the optimization problem yields:
Equation ( 2 ) states that value of time as a personal resource (or simply value of leisure) equals wage rate plus the value of utility from work. If \(T_{i}\) in Eq. ( 3 ) is not restricted to its minimum then by the virtue of complementary slackness condition its multiplier would be zero. Which in turn implies that VTTS = 0 and that \(\frac{{\partial U/\partial T_{i} }}{\lambda } = w + \frac{{\partial U/\partial T_{w} }}{\lambda }\) , that is, the value of marginal utility from the activity \(i\) would be equal to value of leisure. In other words, if a person spends on an activity more time than the minimum required (the constraint \(\sum\nolimits_{i = 1}^{n} {\kappa_{i} } (T_{i} - \bar{T}) \ge 0\) is not binding), such activity would be what DeSerpa ( 1971 ) calls a pure leisure good and its value equals to the value of time as a resource. On the other hand, if \(\sum\nolimits_{i = 1}^{n} {\kappa_{i} } (T_{i} - \bar{T}) = 0\) then \({{\kappa_{i} } \mathord{\left/ {\vphantom {{\kappa_{i} } \lambda }} \right. \kern-0pt} \lambda }\) can be interpreted as value of time saved (VTTS) in the activity \(i\) .
Most work in the transportation field assumes traveling is a means to an end and travel time is a disutility to be minimized. However, in the recent years new concepts emerged, including the so-called positive utility of travel, which suggests that travel can provide benefits and may be motivated by factors beyond reaching activity destinations (see, e.g., Mokhtarian and Salomon 2001 ; Mokhtarian 2005 ). Positive utility of travel implies that \(\partial U/\partial T_{i}\) is positive. In the extreme case, if positive utility of time offsets \(w + \frac{{\partial U/\partial T_{w} }}{\lambda }\) then VTTS would be zero. However, note that VTTS = 0 does not mean that the value of time is zero.
Time is scarce and the time spent on traveling to the site as well as the time spent on the site is time that could have been devoted to other activities. The value of those lost opportunities is the time cost of the trip. It is important to distinguish between VTTS and the value of time in terms of lost opportunities. If the main goal of the analysis was to estimate benefits from a new road or any other public investment that would result in time savings then the analysis should focus on monetizing benefits from time saved. However, if the goal is to estimate consumer surplus from visiting a given site then the analysis should focus on estimating the alternative cost of time. Unfortunately, in the cases when \(\frac{{\partial U/\partial T_{i} }}{\lambda } > 0\) , VTTS will underestimate the true value of time and the more similar the value of travel is to the value of time on-site, the larger the discrepancy between VTTS and the value of time in terms of lost opportunities will be.
1.2 Valuing the Opportunity Cost of Travel Time in Recreation Demand Models: Previous Research
The incorporation of the value of travel time in the TCM studies has been a source of concern since the earliest applications of this method (e.g., Clawson and Knetsch 1966 ; Johnson 1966 ). Researchers disagreed not only about how much the travel time is worth but also whether it should be included it in the model at all. Cesario ( 1976 ) provided an early cogent discussion of the incorporation of the value of time into travel cost models. Despite the decades of research into the value of time, Randall’s ( 1994 ) observation that “the cost of travel time remains an empirical mystery” remains valid and estimating the value of travel time (or, in most cases, rather the opportunity cost of time) remains a frequently discussed problem in the literature on TCM (e.g., Fletcher et al. 1990 ; Garrod and Willis 1999 ; Hanley and Barbier 2009 ).
Early on McConnell ( 1975 ) stressed the need to estimate the value of time before incorporating it in the demand function. However, uncovering the rate of substitution between money and time was long considered empirically intractable (as these trade-offs are endogenous and unobservable), even if conceptually possible. Cesario’s ( 1976 ) suggestion that commuter’s travel time values of 25–50% of an individual’s wage rate was widely adopted. Using a fraction of wage rate has remained probably the most common approach, with the compromise value of 33% being the most broadly accepted level (Hellerstein and Mendelsohn 1993 ; Englin and Cameron 1996 ; Garrod and Willis 1999 ; Gürlük and Rehber 2008 ; Egan et al. 2009 ; Huhtala and Lankia 2012 ). Critics of the wage-based approach note that it makes little sense for those without reported wages, the method would suggest their marginal utility of time is zero. That is clearly not the case (Feather and Shaw 1999 ; Parsons 2003 ). Footnote 1
Englin and Shonkwiler ( 1995 ) developed a model linking a count travel cost to a confirmatory factor analytic model. The confirmatory factor analytic portion allowed a travel time value to be imputed for each individual and incorporated into the cost of travel. In a further development, Feather and Shaw ( 1999 ) used shadow wages (the values of extra units of leisure time) as the opportunity cost of travel time and compared this with previous approaches (using a fraction of wage rate and hedonic wage equations). On average, their estimates were better adjusted to the observed wage rates for different employment categories of respondents, compared with the wage rate predicted by the hedonic model.
Recent work has focused on the relationship between one’s work and life schedule and the value of time in recreational travel. The early discussion of these issues was put forth by Bockstael et al. ( 1987 ) who proposed a general framework on how to incorporate time in TCM studies, based on insights from the labor literature. Demand for time depends on whether an individual can freely substitute recreation for work (interior solution) or has fixed work hours (corner solution). Most recently, Larson and Lew ( 2014 ) empirically implemented a system of joint labor-recreation equations to capture these effects. Palmquist et al. ( 2010 ) employed a joint revealed stated preference approach to deal with fundamental lack of substitutability of recreation time for other forms of time. Both of these efforts seek a structural analysis of the value of time that looks at the relationship between the demand for time and hence value and flexibility to substitute time.
A second recent strand of work has focused on revealed valuations of travel time. Fezzi et al. ( 2014 ) utilized a natural experiment where recreationists had a choice of a toll road which was faster or not paying a toll and taking more time to reach the recreation site. This is a novel approach and very robust but it is also specific to a particular site and so will be subject to the usual limitations if the values are transferred to other settings. Wolff ( 2014 ) utilized speeding behavior as a function of gasoline price to identify the value of time. This is also revealed preference approach and so is excellent for the area studied but again the values must be transferred to use in other settings.
Early suggestions to combine TCM with contingent valuation or contingent behavior questions (Cameron 1992a , b ; Adamowicz et al. 1994 ; Englin and Cameron 1996 ) explored the methodological issues without paying specific attention to the opportunity cost of time. For example, Englin and Cameron ( 1996 ) added contingent behavior questions to a TCM study but these questions referred to general trip costs and not specifically to the opportunity cost of time. Nevertheless, such an approach makes it possible to impose exogenously varying travel costs and could be applied to opportunity cost of time too. Álvarez-Farizo et al. ( 2001 ) adopted contingent valuation to estimate the value of leisure time for use in recreational models and confirmed a significant variation in leisure time values. Building on Shaw ( 1992 ), Casey et al. ( 1995 ) offered an alternative approach, indicating that individual preferences regarding time are better reflected by the opportunity costs of time associated with a particular aspect of recreation than the wage. After all, the latter measures the trade-off between work and leisure more generally. They complemented a standard travel cost survey with a contingent valuation question about peoples’ willingness to accept compensation to forgo a precisely defined recreational experience and used these results to derive the value of leisure time. Ovaskainen et al. ( 2012 ) directly elicited a stated value of time using a contingent valuation survey. Finally, Lloyd-Smith et al. ( 2019 ) in the context of recreation demand for fishing trips found that individual value of leisure time is substantially different from one’s implied wage rate.
In light of the above challenges of incorporating meaningful estimates of the opportunity cost of time into recreational demand models, in what follows we propose to combine TCM with a DCE that would indicate how much each respondent values travel time. Compared to most of the above ideas, ours is more flexible and it is very precise in that we obtain specific estimates on the opportunity cost of time for each respondent in any potential setting. We explain this approach by first reviewing the methodology required by the TCM and DCE studies, with a particular focus on econometric derivation of individual-specific values of travel time savings. We then move to an empirical illustration of our approach, which is compared with traditional treatments of value of travel time savings. Our case study not only serves as an example of the methodology we propose, but also illustrates that the usual approach of assuming that respondents’ values of travel time savings are proportional to their wages is largely unfounded. The last section offers discussion of the results and conclusions.
![](http://playon.fun/777/templates/cheerup/res/banner1.gif)
2 Methods and Econometric Treatment
2.1 the travel cost method.
The individual travel cost method treats trips to a site as the quantity demanded, while the cost of the trip as the price of access to the site. These assumptions result in a demand function of the following form:
where \(r_{i}\) is the number of trips taken by individual \(i\) to a given site during a given time period, \(p_{i}\) is the cost of access to the site (which usually consists of the cost of travel and opportunity cost of travel time), and \({\mathbf{z}}_{i}\) is a vector of individual characteristics that are believed to influence the number of trips an individual takes.
In this setting, the consumer surplus associated with accessing the site by an individual \(i\) is represented by:
where \(p_{i}^{0}\) is the current trip cost to the site and \(p_{i}^{ \cdot }\) is the cost level at which the number of trips goes to zero, also called individual \(i\) ’s ‘choke price’.
A standard practice is to model single-site recreation demand functions using count data distributions. The two most frequently used count models are Poisson and Negative Binomial. These models are flexible enough to handle truncation, a large number of zero trips in the data, and preference heterogeneity. The main advantage of the Poisson model is that it is a member of the linear exponential family and so its parameters are unbiased as long as the underlying demand relationship is linear exponential. However, the Poisson distribution has the property of equi-dispersion—the first two moments of a distribution are equal, i.e., \(E\left( Y \right) = \mu = V\left( Y \right)\) . If a particular data set does not satisfy this assumption, as is in the case of our study, then more efficient estimates of the parameters can be obtained from the negative binomial distribution as it does not require equi-dispersion.
A second area of consideration is the method used to sample the trip data. If the data was sampled on-site the frequency of visitation by a user affects the likelihood of being in the sample. This sampling bias is referred to as endogenous stratification. The more frequently one visits a site the more likely they are to be sampled. A second issue is that only visitors can possibly be sampled. As a result, the sample is also truncated at zero. The problem of endogenous stratification and truncation in the context of travel cost modeling has been addressed for the Poisson model by Shaw ( 1988 ). Englin and Shonkwiler ( 1995 ) extended the analysis to the truncated and endogenously stratified negative binomial model. Englin and Shonkwiler ( 1995 ) accommodated three features of on-site samples concerning count data: over-dispersion, truncation at zero, and endogenous stratification due to oversampling of frequent users of the site. In this model, the probability of individual \(i\) making \(y_{i}\) trips to the site is given by:
where \(\varGamma\) represents the gamma function, \(\lambda_{i}\) is the mean, which is typically modeled as a function of explanatory variables and \(\alpha_{i}\) is the over-dispersion parameter. Footnote 2
2.2 Discrete Choice Experiments
In environmental economics stated preference methods are commonly used for modeling consumers’ preferences and valuation (Carson and Czajkowski 2014 ). Respondents’ choices are typically modeled in a random utility framework, which assumes that the utility associated with any choice alternative can be divided into a sum of contributions that can be observed by a researcher, and a component that cannot, hence is assumed random. Specifically, consider the following empirical specification of a random utility multinomial choice model:
where \(U_{ij}\) represents respondent \(i\) ’s utility associated with selecting alternative \(j\) out of a set of \(J\) available alternatives, \({\mathbf{x}}_{ij}\) is a vector of respondent- and alternative-specific choice attributes, i.e., goods or their characteristics, and \({\varvec{\upbeta}}_{i}\) represents a vector of individual-specific taste parameters associated with marginal utilities of the choice attributes. Assumptions regarding parametric distributions of the taste parameters, such that \({\varvec{\upbeta}}_{i} \sim {\mathbf{f}}\left( {{\mathbf{b}},{\varvec{\Sigma}}} \right)\) , where \({\mathbf{b}}\) is a vector of sample means and \({\varvec{\Sigma}}\) is a variance–covariance matrix, allows to account for unobserved preference heterogeneity and possibly—correlations between random taste parameters.
The stochastic component of the utility function \(\left( \varepsilon \right)\) may be interpreted as resulting from researcher’s inability to observe all attributes of choice and all significant characteristics of respondents (McFadden 1976 ), or as decision maker’s choice from a set of his decision rules. Random utility theory is transformed into different econometric models by making assumptions about the distribution of the random error term and the random parameters. Typically, \(\varepsilon_{ij}\) is assumed to be independently and identically (iid) Extreme Value Type 1 distributed across individuals and alternatives. When unobserved preference heterogeneity is allowed in a way presented above, this leads to a Random Parameters Mixed Logit (RP-MXL) model (McFadden and Train 2000 ).
In what follows, we utilize Bayesian framework for estimating a RP-MXL model and deriving individual-level taste parameters and, as a result, individual-specific VTTS. The advantages of Bayesian approach over classical estimation include easier identification of a global maximum of the likelihood function, and handling correlated random parameters (Huber and Train 2001 ). In addition, in a Bayesian approach identification of individual-level parameters is less of an issue than in classical approach, since in extreme cases the prior can provide the necessary information.
Bayesian estimation procedures for the RP-MXL model do not require simulating choice probabilities. Instead, the likelihood of observing individual \(i\) making a sequence of \(T\) choices \({\mathbf{Y}}_{i} = \left\{ {y_{i1} , \ldots ,y_{it} , \ldots y_{iT} } \right\}\) is the product of standard logit formulas, conditional on \({\varvec{\upbeta}}\) :
The unconditional probability is the integral of ( 9 ) with respect to all values of \({\varvec{\upbeta}}_{i}\) , weighted by their multivariate probability density \(\psi \left( {{\varvec{\upbeta}}_{i} } \right)\) :
The Bayesian approach requires specifying priors for the model parameters \({\mathbf{b}}\) , \({\varvec{\Sigma}}\) and \({\varvec{\upbeta}}_{i}\) for all
\(i = 1..N\) . Typically, a diffuse normal distribution (with zero means and diagonal matrix of arbitrarily large variances \({\varvec{\Theta}}\) , allowing for almost flat distribution) is used as a prior for \({\mathbf{b}}\) , \({\mathbf{b}} \sim MVN\left( {0,{\varvec{\Theta}}} \right)\) , and inverted Wishart distribution (with the number of degrees of freedom \(K\) equal to the length of \({\mathbf{b}}\) , and parameter \(K{\mathbf{I}}\) , where \({\mathbf{I}}\) is a \(K\) -dimensional identity matrix) is used as a prior for \({\varvec{\Sigma}}\) , \({\varvec{\Sigma}} \sim IW\left( {K,K{\mathbf{I}}} \right)\) . The priors for each individual’s taste parameters \({\varvec{\upbeta}}_{i}\) are proportional to the assumed (population-level) distributions of taste parameters times the priors on \({\mathbf{b}}\) and \({\varvec{\Sigma}}\) ; as an aside, because of this hierarchy of parameters this procedure is often referred to as hierarchical Bayes. As a result, denoting choice sequences of all individuals at all choice occasions as \({\mathbf{Y}}\) , the joint posterior distribution on \({\mathbf{b}}\) , \({\varvec{\Sigma}}\) and each \({\varvec{\upbeta}}_{i}\) is:
Since using the parametric distributions which impose bounds on taste parameters may make direct drawing from the joint posterior distribution difficult, some variant of Metropolis–Hasting algorithm is usually used (Train 2009 ). Footnote 3
The approach that we propose in this paper extends the traditional TCM by utilizing individual-specific VTTS. In order to make this possible and, at the same time, allow for preference heterogeneity it is crucial to obtain individual-level taste parameter estimates. Although in this paper we adopt a Bayesian approach, Huber and Train ( 2001 ) showed that reliable individual-level parameters for discrete choice models can be obtained irrespectively of the estimation or inference framework. Within a Bayesian framework, the distribution of coefficients across the population is estimated and used as a prior, which combined with individual’s choices results in posterior estimates of each individual’s tastes (Rossi et al. 1996 ; Allenby and Rossi 1998 ). Similarly, in a classical setting, applying Bayes theorem, i.e., combining maximum likelihood estimates of the population distribution with individual choices, makes derivation of individual-specific parameter estimates possible (Revelt and Train 2000 ). Huber and Train ( 2001 ) showed that these approaches lead to largely equivalent results.
3 Empirical Study
In order to investigate differences resulting from applying individual-level estimates of travel time versus the traditionally assumed value of time we designed and implemented a joint TCM-DCE study in the context of recreational birdwatching.
3.1 Study Site, Experimental Design and Survey Administration
The study site selected for this application was Żywkowo, one of Polish ‘stork villages’—a term used by a recent New York Times article about them (Whitaker 2015 ). A stork village is a common name for a village with a white stork ( Ciconia ciconia ) breeding colony, often inhabited by more storks than people. Żywkowo, the best-known stork village in Poland, has approximately 40 white stork nests and 10 households, while it receives approximately 2000–5000 tourists annually, many of whom come from abroad. Żywkowo lays in the north-east of Poland, on the periphery of one of the most attractive parts of the country to tourists, the Masurian Lake District. It is not located near any major tourist attraction and is relatively far from larger cities; in addition, since there are no other attractions in the village it is visited solely because of birds, and more specifically—because of white storks.
The questionnaire was designed to collect the usual data necessary for a TCM study. We asked where the tourists came from, distinguishing between their most recent stop (if they visited more than one place during their trips) and their place of residence. We also asked how long the travel took, what means of transportation were used and the number of people travelling in a party. In order to identify respondents who, in general, had positive willingness to pay for travel time savings we asked if they had wished their travel time to the site was shorter. Footnote 4 After that, respondents who expressed general interest in making their travel time shorter were asked to participate in hypothetical discrete choice tasks designed to reveal their WTP for travel time savings. Finally, respondents were asked socio-economic questions, providing information about their age, gender, income, level of education, and basic birdwatching preferences. Questionnaires were available in Polish, German and English. Footnote 5
The DCE part of the survey was introduced as follows:
Now we would like to ask you to take part in an exercise that involves making some choices. Imagine that the trip from the last place of your stay could be shorter. However, it would require an additional cost. You would have to personally pay this cost and it would increase the current cost of your trip. Please assume that shortening the trip would not decrease the costs of your travel. You could spend the time that you would save in any preferred way, for example resting or working. In a moment you we will show you several hypothetical situations that present different combinations of time saved and the related cost. In each case, please choose a variant that you consider the best – from your own point of view (please think about yourself only). Bear in mind that the additional cost would reduce your budget available for other purposes. This is why we ask you to treat this cost as if you would really have to pay it. If you would not be willing to pay anything extra for the saved time, choose Alternative 1 – status quo.
The DCE utilized up to 6 choice tasks per respondent. Each choice task consisted of 3 alternatives—one status quo alternative associated with no travel time savings and no costs, and two alternatives associated with different travel time savings and additional cost. There were 3 versions of the DCE questions which differed in the utilized attribute levels, depending on respondent’s travel time and an additional version for self-administered surveys that used relative travel time reduction levels. The attribute levels are presented in Table 1 .
The design of each DCE version was generated using NGENE. We optimized each experimental design for the D-efficiency of an MNL model using Bayesian priors (Ferrini and Scarpa 2007 ). All prior estimates were assumed to be normally distributed, with their means derived from the MNL model estimated on the dataset from the pilot survey, and standard deviations equal to 0.25 of each parameter’s mean (with an absolute minimum for means that were very close to zero). Additionally, the design included constraints on attribute level combinations, to rule out dominated or repetitive alternatives.
Tourists visiting Żywkowo were surveyed on site between April and September of 2011, that is, since when the storks returned from their spring migration to when they left for autumn migration. Questionnaires were available to tourists visiting an exhibition room. Tourists were prompted to take part in the study by local employees and, additionally, by interviewers who assisted the local staff at times when the tourists were the most numerous. In 2011, 2850 tourists visited the exhibition room, of whom 583 agreed to complete the questionnaire, resulting in a response rate above 20%. Footnote 6 Socio-demographic characteristics of the sample and main descriptive statistics of the journeys are presented in Table 2 .
3.2 Deriving Respondent-Specific Values of Travel Time Savings with Discrete Choice Experiment Approach
We start by presenting the results of the discrete choice experiment estimated for respondents who indicated that they wished their journey to the study site had been shorter ( n = 247, 47%). Respondents who answered ‘No’ were assumed not to be ‘in the market’ for shortening their journey, and hence their WTP for travel time savings was 0. Footnote 7
The RP-MXL model was estimated using the Bayesian procedures described in Sect. 2.2. The choice attributes included travel time savings, cost and an alternative specific constant associated with the status quo alternative. All taste parameters were assumed random. Since economic theory indicates that utility associated with (negative) cost and travel time savings (for respondents who indicated that they wished their journey had been shorter) cannot be negative, we assumed that population-level parameters of these attributes were log-normally distributed. The parameter of the alternative specific constant for the status quo alternative was assumed to follow normal distribution.
The estimation was performed in Matlab. Footnote 8 In our application, we used 10 5 iterations for ‘burn-in’ (the iterations used by Metropolis–Hasting algorithm within which the draws converge to the target, conditional posterior distribution), and after that we retained every 11th iteration result for the total of 10 5 iterations used to conduct inference, i.e., from a classical perspective, deriving estimates of the parameters. Footnote 9 Finally, we used 10 6 draws per individual to simulate the estimated distributions of random parameters and to calculate simulated log-likelihood value. The step length for the Metropolis–Hasting algorithm was set to 0.3, well within the range suggested by Gelman et al. ( 2003 ).
The estimation results are presented in Table 3 . The first column represents the reference MNL model. The improvement in model fit from the MNL to the RP-MXL model with correlated parameters, as indicated by Akaike information criterion (AIC) and Bayesian information criterion (BIC), is an evidence of substantial heterogeneity in respondents’ preferences. This is confirmed by relatively large estimates of standard deviations of population parameters. The results of a likelihood ratio tests show that indeed, all parameters should be modeled as random.
The estimation results presented above allowed us to derive individual-specific parameters in a fashion described in Sect. 2.2. These parameters were in turn used to simulate Footnote 10 individual-level willingness to pay for travel time savings, following Small and Rosen ( 1981 ) and Hanemann ( 1984 ):
where \(\mu\) is the marginal utility of income (the parameter on price), \({\varvec{\upbeta}}\) is vector of estimated parameters of the indirect utility function, \({\mathbf{x}}_{0}\) are the levels of the attributes in the reference situation and \({\mathbf{x}}_{1}\) are the levels of the attributes in the improved situation. In our case, we assumed two alternatives ( \(n = 2\) ; status quo and non-status quo) and the improvement in the form of 1-h travel time reduction, which occurred in the non-status quo alternative of \({\mathbf{x}}_{1}\) .
Descriptive statistics of these individual-specific values of travel time savings for the sample of our respondents are presented in Table 4 . For comparison, the table also includes the statistics for respondents’ wage rates. Footnote 11
The results of this exercise allow for a few interesting conclusions. First of all, even a relatively simple discrete choice experiment can allow for calculating respondent-specific values of travel time savings. The descriptive statistics presented in Table 4 show that individual-specific values of WTP for travel time savings are plausible for virtually all respondents in our sample.
Secondly, we find that all respondents’ mean value of 1-h travel time savings is very close 1/2 of their mean wage rate. However, on closer inspection, 47% of respondents declared that they did not wish their journey was shorter, implying VTTS = 0. In addition, 29.81% of those who were generally ‘in the market’ for shortening their travel times still made choices which implied very low VTTS (e.g., did not choose the costly improvement alternative in any of the choice tasks). Footnote 12 Interestingly, mean VTTS of those who indicated they wished their journey was shorter is close to their (full) mean wage rate. Finally, we note that the correlation of respondents’ VTTS and their wage rate is very low (0.0411 for all respondents, 0.1191 for those who declared they wished their journey was shorter).
We investigate the relationship between respondents’ VTTS and wage rate further using graphical illustration provided in Fig. 1 . If VTTS and wage rates were correlated, we would expect a positive linear relationship. Instead, we find that respondents’ WTP for shortening their trip is largely independent of their wage rate.
![travel cost method pdf figure 1](https://media.springernature.com/lw685/springer-static/image/art%3A10.1007%2Fs10640-019-00355-6/MediaObjects/10640_2019_355_Fig1_HTML.png)
Respondents’ wage rates and implied values of travel time savings
Overall, our results do not support using respondents’ wage rate as a proxy for their VTTS. Instead, we argue for utilizing stated preference methods for measuring individual level VTTS and in what follows, we demonstrate substantial differences resulting from utilizing individual-level versus aggregated versus traditional assumptions regarding the value of travel time in travel cost models.
3.2.1 Individual Heterogeneity with Respect to VTTS
In order to provide an insight into respondents’ heterogeneity with respect to their VTTS we present the logit model for ‘market participation’—respondents’ answers to the question if they (in general) would prefer that their journey was shorter and a simple linear regression model in which individual-specific VTTS are explained with respondents’ socio-demographic variables (Table 5 ).
The results show that respondents whose journeys were longer were more likely to answer that they indeed wished their journey had been shorter; the relationship is convex, as indicated by the negative coefficient associated with the travel time squared. Footnote 13 These results coincide with individual specific VTTS—respondents who had to travel longer were willing to pay more to shorten their journey (although at a decreasing rate). Additionally, we find that respondents with medium or high level of education are more likely to state that they wish their journey was shorter. Respondents from larger households are also statistically willing to pay more for travel time reduction, although this last effect is counterfeited for respondents with children. Finally, we note that once respondents’ socio-demographic characteristics are controlled for, their wage was not a significant explanatory variable of willing to shorten one’s journey, Footnote 14 and only weakly significant for explaining their individual VTTS. This is in stark contrast with the common practice of utilizing fraction of one’s income as a proxy for their VTTS (Parsons 2017 ).
These results have profound implications. Since respondents whose traveling times are larger have higher WTP for shortening their journey it clearly follows that using mean VTTS for every respondent in the sample will negatively bias the cost of travel time. This is because observations with higher individual-specific VTTS have higher weights in the utility function (more hours multiplied with higher cost per hour). In addition, since respondents’ VTTS appears statistically independent from their wage, using individual-specific wage rates as a proxy of VTTS is not convincing approach either. We illustrate this finding with the comparison of different modeling approaches in the next section.
3.3 Travel Cost Method with Consumer-Specific Values of Travel Time Savings
In this section we present the estimation results of 5 travel cost models with different assumptions with respect to respondents’ VTTS. Generally, visitor \(i\) ’s expected number of trips can be calculated as:
which serves as our travel cost recreation demand function. The \(TC_{i}\) represents individual \(i\) ’s cost associated with reaching the stork village and \({\mathbf{Z}}_{i}\) is a vector of individual characteristics that are considered to influence the number of trips \(i\) takes (in our case, since we intended to keep our approach as simple as possible, we only used a constant).
The average cost of traveling 1 km was assumed to be 0.45 PLN Footnote 15 ; however, when calculating cost per person we took a travelling party size into account. As far as the VTTS is concerned, the following alternative specifications were used:
VTTS = 1/3 of respondent’s wage rate;
VTTS = respondent’s wage rate;
VTTS = mean WTP derived from the MNL model;
VTTS = individual-specific WTP derived from the RP-MXL model.
In all cases, we only included the cost associated with the travel time for respondents who indicated that they wished their journey was shorter. The resulting travel costs, calculated under different assumptions with respect to VTTS, are presented in Table 6 .
We estimated the count data models in a Bayesian framework, applying the independence chain Metropolis–Hastings algorithm with a multivariate t distribution (with mean \(\left( {{\hat{\mathbf{\beta }}}} \right)\) equal to the mode of the posterior kernel, and variance equal inverted negative Hessian resulting from the maximum likelihood estimator subroutine evaluated at \({\hat{\mathbf{\beta }}}\) ) Footnote 16 as a candidate-generating density (Chib et al. 1998 ; Davis and Moeltner 2010 ). The Gibbs Sampler was implemented with 100,000 burn-in draws and 10,000 retained draws. Footnote 17
The estimation results are presented in Table 7 . As expected, the travel cost coefficient is negative and statistically significant at the 1% level in all the models. The constant and the over-dispersion parameter \(\alpha_{i}\) are also highly significant. Footnote 18 It is impossible to directly compare the models in terms of fit, as each one is essentially estimated on a different dataset, and hence they are not presented in Table 7 . A common theme is that the intercept term is relatively stable across specifications ranging from − 5.4125 to − 5.4966, virtually indistinguishable from each other statistically. The over-dispersion parameters are also similar. The slope parameters while not statistically different at conventional test levels follow the usual pattern of higher values of time flattening the slope of the estimated demand curve.
We now turn to presenting the welfare measures associated with the different VTTS assumptions made in Models 1 to 5. Consumer surpluses (CS) per person per trip were calculated as an inverse of the estimated travel cost parameter \(\left( {{{ - 1} \mathord{\left/ {\vphantom {{ - 1} {\beta_{TC} }}} \right. \kern-0pt} {\beta_{TC} }}} \right)\) . The 95% confidence intervals were simulated. The results are reported in Table 8 .
As the parameter estimates for the demand functions suggest will happen, the welfare estimates for flatter demand curves (ones with higher values for time) are higher. The individual random parameters model provides the highest welfare measures, however, all the CS are plausible (they are in the range of CS reported in other TCM studies conducted in Poland, e.g., Panasiuk 2001 ; Bartczak et al. 2008 ; Bartczak et al. 2012 ; Czajkowski et al. 2015 ; Kulczyk et al. 2016 ; Czajkowski et al. 2018 ; Gawrońska et al. 2018 ; Wiśniewska et al. 2018 ).
4 Discussion and Conclusions
In this paper we propose to combine the usual TCM data with respondent-specific estimates of the value of travel time savings. Although slightly more complicated and more strenuous for respondents, this approach is much more informative than utilizing values of times derived from respondents’ wage rate or stated preference results assuming common value for all individuals in the sample.
Our approach is different from those proposed so far in that we do not just extrapolate the appropriate wage rate based on the respondents’ socio-economic data combined with other sources, nor any structural analysis of the value of time for our respondents. Our DCE questions are more flexible than the approach of Fezzi et al. ( 2014 ), in that they are general and not specific to our study. At the same time, this approach limits the scope of researcher judgment necessary to estimate the opportunity cost of travel time, and it reduces the need for external data to be combined with survey data in an attempt to calculate the opportunity cost of travel time in a structural way.
In light of the difficulties and ambiguities related to the opportunity cost of travel time, some authors decided not to incorporate time costs in their travel cost models (Hanley et al. 2003 ; Alberini and Longo 2006 ; Alberini et al. 2007 ; Fleming and Cook 2008 ). Footnote 19 One of the reasons for this approach is the apprehension that incorporating time might bias the coefficient on the price downwards. Another problem might be that time spent in travel might have a value on its own—travelling might be generating utility for some travelers, resulting from enjoying landscapes and amenities, deriving pleasure from a particular means of transportation, adventure-seeking, variety-seeking and be otherwise productively used (Chavas et al. 1989 ; Lyons and Urry 2005 ; Mokhtarian 2005 ; Ory and Mokhtarian 2005 ). In our study, 47% of respondents declared that they would wish to reduce the travel time of their journey. These results are consistent with previous studies investigating the value of time spent on leisure journeys, which highlight that sometimes the time spent in travel may be worth more than on the final spot (Anable and Gatersleben 2005 ; Larson and Lew 2005 ). Indeed, Żywkowo is located in a remote but particularly picturesque part of the country, with narrow roads lined with large trees, and several other tourist attractions in the region. Clearly, our study helps to challenge the common assumption that “travel is a disutility to be minimized” (Mokhtarian 2005 , p. 93).
Our study indicates that it is not necessary nor adequate to use a fraction of hourly earnings because the opportunity cost of time can be measured more accurately by allowing respondents to express their preferences regarding the time they spend in travel. In this way, we move even further with the argument that the opportunity cost of travel time is defined endogenously—it is a function of visitor’s characteristics. We explicitly account for the opportunity cost of travel time perceived by respondents, as opposed to the real cost of travel time they may incur (Amoako-Tuffour and Martínez-Espiñeira 2012 ). Such a flexible approach allows us to account for the fact that travel time is decided by each individual who can choose longer or shorter routes, considering the consumptive value of travel time. The idea that the valuation of travel time is highly subjective was present in the discussion already since Cesario ( 1976 ). Indeed, we observed substantial heterogeneity in respondents’ preferences in our study, particularly with 47% of respondents declaring that they would not wish their travel time was shorter, and the VTTS of the other respondents very weakly correlated with their wage rates.
Our study has several limitations and it is important to acknowledge them. First, while the dominant empirical approach to infer VTTS in the transportation literature is based on experiments, in which respondents are asked to make hypothetical choices or personal travel time gains in exchange for travel costs paid from their own budget, this approach is no longer in line with the state-of-the-art stated preference valuation methodology. In particular, our DCE was not consequential (Vossler et al. 2012 ), it relayed on epsilon truthfulness and hence did not satisfy the incentive compatibility conditions (Carson and Groves 2007 ) and did not satisfy several other recommendations for stated preference studies (Champ et al. 2017 ; Johnston et al. 2017 ). As a result, we are unable to claim, that the estimated VTTS are unbiased. How to incorporate VTTS questions in a DCE component of a TCM survey remains an important area for future research (not only in the case of our study, but transport literature in general). Second, the hourly ‘wage rates’ that we used for comparisons were calculated on the basis of household income per adult. It remains an open question if household or individual income should be considered, as the basis for consumers’ purchasing decisions in the context of time savings. Finally, our study applied a single-site version of the TCM. Following Von Haefen ( 2002 ), all substitute sites are captured in the constant of our model. We acknowledge this as a possible limitation of our study. Footnote 20
Many applied researchers are rather conservative in their assumptions about how much the opportunity cost of time might add to the value of a visited site and preferred to use the lower bounds of the wage rate (Neher et al. 2013 ). For example, Hynes et al. ( 2009 ) suggested that it would be useful to determine individual opportunity costs of travel time to avoid a potential bias related to assuming an excessively high wage fraction as a reference. Meanwhile, a comparison of our approach with the key alternative specifications of the opportunity cost of time show that recreationists may actually value their time higher than it has been expected so far. Consumer surplus calculated with the RP-MXL model was more than twice as high as in the case of not including the travel time at all, or when the opportunity cost of travel time was assumed to be 1/3 of the wage rate. It was even higher than if the opportunity cost of travel time equaled full wage rate of those who did not say they wished their journey had been shorter.
More broadly, our study indicates a need to incorporate various components of the travel cost and to do so in a respondent-specific way. Indeed, travel is a complex issue, especially when related to recreational purposes, and it bears many unmeasured qualities which may be differently perceived and valued by the different travelers (Salomon and Mokhtarian 1998 ). Our study shows an opportunity to integrate different valuation methods and thus practically use the fact that they refer to different issues and can provide complementary information. Our empirical illustration of valuing recreational birdwatching in a stork village demonstrates the feasibility of this approach. It also shows that, as the minimum, future studies could directly ask respondents if they wish their journey was shorter, and include value of travel time of only those who agreed. In our case, and in line with Jara-Díaz et al. ( 2008 ) and Lloyd-Smith et al. ( 2019 ), those who were willing to pay to make their journey shorter declared WTP per hour on average close to their full wage rate, although more evidence is needed to verify if this finding is universal.
Notably, the transportation literature focusing on the estimation of the value of time has moved on from the rough approach of taking 33% of wage to more fine-tuned estimates taking into account, among other things, trip purpose, transport mode and difference between drivers and passengers (e.g., Börjesson and Eliasson 2014 ; Sartori et al. 2014 ; Mouter and Chorus 2016 ).
Amoako-Tuffour and Martínez-Espiñeira ( 2012 ) took this reasoning further and allowed the over-dispersion parameter \(\alpha_{i}\) to vary according to respondent characteristics (and they used their survey data to indicate which fraction of the wage rate best represented the respondents’ opportunity cost of travel time, making also this parameter a function of the respondents’ characteristics).
Interestingly, the results of the estimation procedure are asymptotically equivalent to the classical, maximum likelihood estimator. The results can thus be given a dual—classical and Bayesian—interpretation.
The exact wording of the question was: “Would you prefer the trip from the last place of your last stay to be shorter? (a) Yes; (b) No; (c) I do not know”. Respondents who answered (a) or (c) were considered to be ‘in the market’ for shortening their journey time.
More details about the survey are available in Czajkowski et al. ( 2014 ).
We are unable to compare the sample characteristics with the characteristics of the target population because the characteristics of the target population (visitors of the study site) are unavailable. However, we note that share of surveyed visitors was relatively large, the interviews were collected throughout the entire season and the respondents were selected randomly from the visitors available at a time (for parties traveling together, only respondents who actually paid for the trip were surveyed; in the case of more than one person paying for the trip (e.g., a family with joint budget or a party who shared costs)—the respondent was selected randomly).
This is consistent with early theoretical contributions to microeconomic time allocation theory and travel time valuation, which recognized that, in some cases, travel may be enjoyable (e.g., Becker 1965 ; Johnson 1966 ; Evans 1972 ). Another line of research related to why people do not want their trip to be shorter is related to non-shortest-path route choice. There is now numerous evidence of this type behavior (Agrawal et al. 2008 ; Bovy and Stern 2012 ; Broach et al. 2012 ). These studies evidence that people do not always choose the shortest, fastest, or cheapest route to their destination. It is well recognized in the transportation literature that positive utility of travel may be at play, if travelers want to travel farther than necessary or if they choose more scenic or enjoyable but out-of-the way paths.
The dataset and software codes for the models used in this paper are available from http://czaj.org/research/supplementary-materials .
We retained only every 11th draw in order to reduce the amount of correlation among the draws.
Only respondents who declared that they wished their journey was shorter were included in this analysis; the others were assumed not to be willing to pay for travel time savings (VTTS = 0). In simulation we accounted for effective means of the distributions which were modelled as truncated normal.
The wage rate was calculated as net (after tax) household income (including all sources of income, such as salaries, pensions, rents etc.) divided by the number of adults in a household and divided by 160 (regular number of working hours per month). While this is not strictly the individual’s wage per hour, it represents the family budget constraint, which is often the more appropriate measure of purchasing decisions (Lindhjem and Navrud 2009 ). For respondents who refused to disclose their household income, we arbitrarily assumed their income was equal to the sample mean.
As noted by one of the reviewers, this is a likely indication of a status quo bias that may have implications for our estimated consumer surplus indicators.
This result is consistent with the transportation literature findings that the satisfaction with the travel experience and travel liking tends to decrease with longer trip distances or durations (Rasouli and Timmermans 2014 ; Milakis et al. 2015 ; Morris and Guerra 2015 ) (e.g., Rasouli and Timmermans 2014 ; Milakis et al. 2015 ; Morris and Guerra 2015 ).
Wage remains insignificant even if (possibly correlated) education is not included as an explanatory variable, and if it is the only explanatory variable in the model.
We used the official average operating cost according to the Polish Automobile Association. This rate is commonly used for reimbursing employees who use private vehicles for official business.
The tuner elements for these t-distributions were set as the degrees of freedom = 8 for means and a scalar 2 for the variance. These settings led to desirable acceptance rates and efficiency measures.
As an aside, we have also tried to combine the two estimation steps into one. This can theoretically be done by saving the appropriate number of iteration- and individual-specific parameters from the discrete choice part (and hence iteration- and individual-specific VTTS values) and utilizing them for each of the iterations conducted in step 2. In other words, each iteration in the estimation of the count data model would use a different explanatory vector, thus preserving the conditionality that links the two equations. However, this approach turned out to be infeasible, due to some iteration- and individual-specific VTTS being undefined or plus/minus infinity, particularly when the value of the cost parameter was drawn very close to 0. As a result, the estimation of the count data model could not proceed without additional assumptions (such as assuming that VTTS of such respondents was 0, or sample mean). In addition to the independence chain version of the Metropolis–Hastings algorithm which requires optimizing the LL function (and hence evaluating gradients) for each iteration and causes additional problems if some of the observations are not real numbers, we tried a simpler, random walk version of this algorithm. This approach also turned out infeasible for simultaneous estimation because even without the necessity to calculate gradients the value of the log-likelihood function was often undefined. We acknowledge the statistical inefficiency of a two-step estimation procedure, which is likely to bias the standard errors of the model estimates presented in Table 7 .
On a technical note, since the candidate parameters for the count data model are derived from a multivariate t distribution, we found that with sufficiently large variance, every so often the candidate draw for the \(\alpha\) parameter was negative. This caused numerical problems, as the gamma function (see Eq. 6 ) is only defined for positive values. In order to impose this theory-driven constraint we revised Eq. ( 6 ) in such a way, that \(\alpha = \exp \left( {\alpha^{ * } } \right)\) and optimized for \(\alpha^{ * }\) (similarly to the method proposed by Carson and Czajkowski 2019 ). This proved a convenient way to ensure that \(\alpha\) has no support for negative values, while not changing the log-likelihood function. Similarly, we found that expanding the logarithm of Eq. ( 6 ) in such a way that one uses the log gamma instead of gamma function allows to avoid further numerical problems with exploding values for some iterations.
An alternative to using the opportunity cost of time was proposed by Shrestha et al. ( 2002 ) and later applied by Hanley and Barbier ( 2009 ). They included travel time in hours as an extra variable, alongside travel cost. The estimated time that respondents would be willing to spend in travel can then be translated into economic value, when combined with information about their willingness to pay money in a utility-theoretic framework (Larson et al. 2004 ). In addition to a travel cost model, one can also develop a separate model of transportation mode choice to estimate the value of travel time, providing information on how time is valued versus the cost of travel (Hausman et al. 1995 ).
We considered including other ‘stork villages’ in the analysis, but the second most popular and recognized such site (Kłopot) is located 600 km away, on the opposite side of Poland.
Adamowicz W, Louviere J, Williams M (1994) Combining revealed and stated preference methods for valuing environmental amenities. J Environ Econ Manag 26(3):271–292
Google Scholar
Agrawal AW, Schlossberg M, Irvin K (2008) How far, by which route and why? A spatial analysis of pedestrian preference. J Urban Des 13(1):81–98
Alberini A, Longo A (2006) Combining the travel cost and contingent behavior methods to value cultural heritage sites: evidence from Armenia. J Cult Econ 30(4):287–304
Alberini A, Zanatta V, Rosato P (2007) Combining actual and contingent behavior to estimate the value of sports fishing in the Lagoon of Venice. Ecol Econ 61(2–3):530–541
Allenby GM, Rossi PE (1998) Marketing models of consumer heterogeneity. J Econom 89(1–2):57–78
Álvarez-Farizo B, Hanley N, Barberán R (2001) The value of leisure time: a contingent rating approach. J Environ Plan Manage 44(5):681–699
Amoako-Tuffour J, Martínez-Espiñeira R (2012) Leisure and the net opportunity cost of travel time in recreation demand analysis: an application to Gros Morne National Park. J Appl Econ 15(1):25–49
Anable J, Gatersleben B (2005) All work and no play? The role of instrumental and affective factors in work and leisure journeys by different travel modes. Transp Res Part A Policy Pract 39(2):163–181
Bartczak A, Lindhjem H, Navrud S, Zandersen M, Żylicz T (2008) Valuing forest recreation on the national level in a transition economy: the case of Poland. For Policy Econ 10(7–8):467–472
Bartczak A, Englin J, Pang A (2012) When are forest visits valued the most? An analysis of the seasonal demand for forest recreation in Poland. Environ Resour Econ 52(2):249–264
Becker GS (1965) A theory of the allocation of time. Econ J 75(299):493–517
Bockstael NE, Strand IE, Hanemann WM (1987) Time and the recreational demand model. Am J Agric Econ 69(2):293–302
Börjesson M, Eliasson J (2014) Experiences from the Swedish value of time study. Transp Res Part A Policy Pract 59:144–158
Bovy PH, Stern E (2012) Route choice: wayfinding in transport networks—wayfinding in transport networks. Springer, Berlin
Broach J, Dill J, Gliebe J (2012) Where do cyclists ride? A route choice model developed with revealed preference GPS data. Transp Res Part A Policy Pract 46(10):1730–1740
Cameron TA (1992a) Combining contingent valuation and travel cost data for the valuation of nonmarket goods. Land Econ 68(3):302–317
Cameron TA (1992b) Nonuser resource values. Am J Agric Econ 74(5):1133–1137
Carson R, Czajkowski M (2014) The discrete choice experiment approach to environmental contingent valuation. Edward Elgar Publishing, Cheltenham
Carson RT, Czajkowski M (2019) A new baseline model for estimating willingness to pay from discrete choice models. J Environ Econ Manag 95:57–61
Carson RT, Groves T (2007) Incentive and informational properties of preference questions. Environ Resour Econ 37(1):181–210
Casey JF, Vukina T, Danielson LE (1995) The economic value of hiking: further considerations of opportunity cost of time in recreational demand models. J Agric Appl Econ 27(2):658–668
Cesario FJ (1976) Value of time in recreation benefit studies. Land Econ 52(1):32–41
Champ PA, Boyle KJ, Brown TC (2017) A primer on nonmarket valuation. Springer, Amsterdam
Chavas J-P, Stoll J, Sellar C (1989) On the commodity value of travel time in recreational activities. Appl Econ 21(6):711–722
Chib S, Greenberg E, Winkelmann R (1998) Posterior simulation and Bayes factors in panel count data models. J Econom 86(1):33–54
Clawson M, Knetsch JL (1966) Economics of outdoor recreation. The Johns Hopkins University Press for Resources for the Future, Washington
Czajkowski M, Giergiczny M, Kronenberg J, Tryjanowski P (2014) The economic recreational value of a white stork nesting colony: a case of ‘stork village’ in Poland. Tour Manag 40:352–360
Czajkowski M, Ahtiainen H, Artell J, Budziński W, Hasler B, Hasselström L, Meyerhoff J, Nõmmann T, Semeniene D, Söderqvist T, Tuhkanen H, Lankia T, Vanags A, Zandersen M, Żylicz T, Hanley N (2015) Valuing the commons: an international study on the recreational benefits of the Baltic Sea. J Environ Manage 156:209–217
Czajkowski M, Zandersen M, Aslam U, Angelidis I, Becker T, Budziński W, Zagórska K (2018) Recreational value of the baltic sea: a spatially explicit site choice model accounting for environmental conditions. Working Paper 11/2018 (270), Faculty of Economic Sciences, University of Warsaw, Poland
Davis AF, Moeltner K (2010) Valuing the prevention of an infestation: the threat of the New Zealand Mud Snail in Northern Nevada. Agric Resour Econ Rev 39(1):56–74
DeSerpa AC (1971) A theory of the economics of time. Econ J 81(324):828–846
Egan KJ, Herriges JA, Kling CL, Downing JA (2009) Valuing water quality as a function of water quality measures. Am J Agric Econ 91(1):106–123
Englin J, Cameron TA (1996) Augmenting travel cost models with contingent behavior data. Environ Resour Econ 7(2):133–147
Englin J, Shonkwiler JS (1995) Modeling recreation demand in the presence of unobservable travel costs: toward a travel price model. J Environ Econ Manag 29(3):368–377
Evans AW (1972) On the theory of the valuation and allocation of time. Scott J Polit Econ 19(1):1–17
Feather P, Shaw WD (1999) Estimating the cost of leisure time for recreation demand models. J Environ Econ Manag 38(1):49–65
Ferrini S, Scarpa R (2007) Designs with a priori information for nonmarket valuation with choice experiments: a Monte Carlo study. J Environ Econ Manag 53(3):342–363
Fezzi C, Bateman IJ, Ferrini S (2014) Using revealed preferences to estimate the value of travel time to recreation sites. J Environ Econ Manag 67(1):58–70
Fleming CM, Cook A (2008) The recreational value of Lake McKenzie, Fraser Island: an application of the travel cost method. Tour Manag 29(6):1197–1205
Fletcher JJ, Adamowicz WL, Graham-Tomasi T (1990) The travel cost model of recreation demand: theoretical and empirical issues. Leis Sci 12(1):119–147
Garrod G, Willis KG (1999) Economic valuation of the environment: methods and case studies. Edward Elgar, Cheltenham
Gawrońska G, Gawroński K, Dymek D, Sankowski E, Harris B (2018) Economic valuation of high natural value areas in central roztocze. Acta Scientiarum Polonorum. Formatio Circumiectus 17(4):45
Gelman A, Carlin JB, Stern HS, Rubin DB (2003) Bayesian data analysis, 2nd edn. Chapman and Hall/CRC, Boca Raton
Gürlük S, Rehber E (2008) A travel cost study to estimate recreational value for a bird refuge at Lake Manyas, Turkey. J Environ Manag 88(4):1350–1360
Hanemann WM (1984) Welfare evaluations in contingent valuation experiments with discrete responses. Am J Agric Econ 66(3):332–341
Hanley N, Barbier EB (2009) Pricing nature. Cost-benefit analysis and environmental policy. Edward Elgar, Cheltenham
Hanley N, Bell D, Alvarez-Farizo B (2003) Valuing the benefits of coastal water quality improvements using contingent and real behaviour. Environ Resour Econ 24(3):273–285
Hausman JA, Leonard GK, McFadden D (1995) A utility-consistent, combined discrete choice and count data model assessing recreational use losses due to natural resource damage. J Public Econ 56(1):1–30
Hellerstein D, Mendelsohn R (1993) A theoretical foundation for count data models. Am J Agric Econ 75(3):604–611
Huber J, Train K (2001) On the similarity of classical and Bayesian estimates of individual mean partworths. Market Lett 12(3):259–269
Huhtala A, Lankia T (2012) Valuation of trips to second homes: Do environmental attributes matter? J Environ Plann Manage 55(6):733–752
Hynes S, Hanley N, O’Donoghue C (2009) Alternative treatments of the cost of time in recreational demand models: an application to whitewater kayaking in Ireland. J Environ Manage 90(2):1014–1021
Jara-Díaz SR, Munizaga MA, Greeven P, Guerra R, Axhausen K (2008) Estimating the value of leisure from a time allocation model. Transp Res Part B Methodol 42(10):946–957
Johnson MB (1966) Travel time and the price of leisure. Econ Inq 4(2):135–145
Johnston RJ, Boyle KJ, Adamowicz W, Bennett J, Brouwer R, Cameron TA, Hanemann WM, Hanley N, Ryan M, Scarpa R, Tourangeau R, Vossler CA (2017) Contemporary guidance for stated preference studies. J Assoc Environ Resour Econ 4(2):319–405
Kulczyk S, Derek M, Woźniak E (2016) How much is the “wonder of nature” worth? The valuation of tourism in the great Masurian lakes using travel cost method. Ekonom Środowisko 4:235–249
Larson DM, Lew DK (2005) Measuring the utility of ancillary travel: revealed preferences in recreation site demand and trips taken. Transp Res Part A Policy Pract 39(2):237–255
Larson DM, Lew DK (2014) The opportunity cost of travel time as a noisy wage fraction. Am J Agric Econ 96(2):420–437
Larson DM, Shaikh SL, Layton D (2004) Revealing preferences for leisure time from stated preference data. Am J Agric Econ 86(2):307–320
Lindhjem H, Navrud S (2009) Asking for individual or household willingness to pay for environmental goods? Environ Resour Econ 43(1):11–29
Lloyd-Smith P, Abbott JK, Adamowicz W, Willard D (2019) Decoupling the value of leisure time from labor market returns in travel cost models. J Assoc Environ Resour Econ 6(2):215–242
Lyons G, Urry J (2005) Travel time use in the information age. Transp Res Part A Policy Pract 39(2):257–276
McConnell KE (1975) Some problems in estimating the demand for outdoor recreation. Am J Agric Econ 57(2):330–334
McFadden D (1976) The revealed preferences of a government bureaucracy: empirical evidence. Bell J Econ 7(1):55–72
McFadden D, Train K (2000) Mixed MNL models for discrete response. J Appl Econom 15(5):447–470
Milakis D, Cervero R, van Wee B, Maat K (2015) Do people consider an acceptable travel time? Evidence from Berkeley, CA. J Transp Geogr 44:76–86
Mokhtarian PL (2005) Travel as a desired end, not just a means. Transp Res Part A Policy Pract 39(2):93–96
Mokhtarian PL, Salomon I (2001) How derived is the demand for travel? Some conceptual and measurement considerations. Transp Res Part A Policy Pract 35(8):695–719
Morris EA, Guerra E (2015) Mood and mode: Does how we travel affect how we feel? Transportation 42(1):25–43
Mouter N, Chorus C (2016) Value of time: a citizen perspective. Transp Res Part A Policy Pract 91:317–329
Neher C, Duffield J, Patterson D (2013) Valuation of national park system visitation: the efficient use of count data models, meta-analysis, and secondary visitor survey data. Environ Manage 52(3):683–698
Ory DT, Mokhtarian PL (2005) When is getting there half the fun? Modeling the liking for travel. Transp Res Part A Policy Pract 39(2):97–123
Ovaskainen V, Neuvonen M, Pouta E (2012) Modelling recreation demand with respondent-reported driving cost and stated cost of travel time: a finnish case. J For Econ 18(4):303–317
Palmquist RB, Phaneuf DJ, Smith VK (2010) Short run constraints and the increasing marginal value of time in recreation. Environ Resour Econ 46(1):19–41
Panasiuk D (2001) Wycena środowiska metodą kosztów podróży w praktyce. Wartość turystyczna Pienińskiego Parku Narodowego. W: Ekonomia a rozwój zrównoważony 2:264–277
Parsons GR (2003) The travel cost model. In: Champ PA, Boyle KJ, Brown TC (eds) A primer on nonmarket valuation. Springer, Netherlands, pp 269–329
Parsons GR (2017) The travel cost model. In: Champ PA, Boyle KJ, Brown TC (eds) A primer on nonmarket valuation. Springer, Netherlands, pp 187–233
Randall A (1994) A difficulty with the travel cost method. Land Econ 70(1):88
Rasouli S, Timmermans H (2014) Activity-based models of travel demand: promises, progress and prospects. Int J Urban Sci 18(1):31–60
Revelt D, Train K (2000) Customer-specific taste parameters and mixed logit: households’ choice of electricity supplier. University of California at Berkeley, Berkeley
Rossi PE, McCulloch RE, Allenby GM (1996) The value of purchase history data in target marketing. Market Sci 15(4):321–340
Salomon I, Mokhtarian PL (1998) What happens when mobility-inclined market segments face accessibility-enhancing policies? Transp Res Part D Transp Environ 3(3):129–140
Sartori D, Catalano G, Genco M, Pancotti C, Sirtori E, Vignetti S, Bo C (2014) Guide to cost-benefit analysis of investment projects. Economic appraisal tool for Cohesion Policy 2014–2020
Shaw D (1988) On-site samples’ regression: problems of non-negative integers, truncation, and endogenous stratification. Journal of Econometrics 37(2):211–223
Shaw WD (1992) Searching for the opportunity cost of an individual’s time. Land Econ 68(1):107
Shrestha RK, Seidl AF, Moraes AS (2002) Value of recreational fishing in the Brazilian Pantanal: a travel cost analysis using count data models. Ecol Econ 42(1–2):289–299
Small KA, Rosen HS (1981) Applied welfare economics with discrete choice models. Econometrica 49(1):105–160
Train KE (2009) Discrete choice methods with simulation, 2nd edn. Cambridge University Press, New York
Von Haefen RH (2002) A complete characterization of the linear, log-linear, and semi-log incomplete demand system models. J Agric Resour Econ 27(2):281–319
Vossler CA, Doyon M, Rondeau D (2012) Truth in consequentiality: theory and field evidence on discrete choice experiments. Am Econ J Microecon 4(4):145–171
Whitaker B (2015) An unlikely tourist attraction in Poland: storks. The New York Times, 2015-11-19
Wiśniewska A, Budziński W, Czajkowski M (2018) Publicly funded cultural institutions – a comparative economic valuation study. University of Warsaw, Department of Economics working paper no. 22(281)
Wolff H (2014) Value of time: speeding behavior and gasoline prices. J Environ Econ Manag 67(1):71–88
Download references
Acknowledgements
The data used in this study was collected in a project funded by the Polish National Science Centre (Grant N N112 29233)9. We thank the participants of the European Association of Environmental and Resource Economists’ conference, Toulouse, June 2013 for their helpful comments on an earlier version of this paper. Mikołaj Czajkowski gratefully acknowledges the support of the National Science Centre of Poland (Sonata Bis, 2018/30/E/HS4/00388).
Author information
Authors and affiliations.
Department of Economics, University of Warsaw, Długa 44/50, 00-241, Warsaw, Poland
Mikołaj Czajkowski & Marek Giergiczny
Faculty of Economics and Sociology, University of Lodz, P.O.W. 3/5, 90-255, Lodz, Poland
Jakub Kronenberg
Morrison School of Agribusiness, Arizona State University, 7171 E. Sonoran Arroyo Mall, Mesa, AZ, 85212, USA
Jeffrey Englin
You can also search for this author in PubMed Google Scholar
Corresponding author
Correspondence to Mikołaj Czajkowski .
Additional information
Publisher's note.
Springer Nature remains neutral with regard to jurisdictional claims in published maps and institutional affiliations.
Rights and permissions
Open Access This article is distributed under the terms of the Creative Commons Attribution 4.0 International License ( http://creativecommons.org/licenses/by/4.0/ ), which permits unrestricted use, distribution, and reproduction in any medium, provided you give appropriate credit to the original author(s) and the source, provide a link to the Creative Commons license, and indicate if changes were made.
Reprints and permissions
About this article
Czajkowski, M., Giergiczny, M., Kronenberg, J. et al. The Individual Travel Cost Method with Consumer-Specific Values of Travel Time Savings. Environ Resource Econ 74 , 961–984 (2019). https://doi.org/10.1007/s10640-019-00355-6
Download citation
Accepted : 10 June 2019
Published : 24 June 2019
Issue Date : November 2019
DOI : https://doi.org/10.1007/s10640-019-00355-6
Share this article
Anyone you share the following link with will be able to read this content:
Sorry, a shareable link is not currently available for this article.
Provided by the Springer Nature SharedIt content-sharing initiative
- Opportunity cost of travel time
- Individual-specific values of travel time savings
- Travel cost method
- Discrete choice experiment
- Integration of valuation methods
- Recreational birdwatching
JEL Classification
- Find a journal
- Publish with us
- Track your research
![](http://playon.fun/777/templates/cheerup/res/banner1.gif)
IMAGES
COMMENTS
taxes). 2 If gas mileage is 25 miles to the gallon—at an assumed average speed of 50 miles per. hour —and if the individual lives 50 miles away from the recreational site, the cost of the ...
3 TCM Travel cost method (TCM) is one of the popular methods used falls under the revealed preference approach to value non-priced or non-market good The other two approaches are: market-based and stated preference approach This approach is based on the assumption that the non- marketed good or service affect preferences expressed by consumers
Chapter 15. ravel Cost Method of Valuing Environmental Amenities. ent valuation or voting) or indirectly reveal values via obs. vedwillingness-to-pay for relate. useful in certain circumstances, but which has flaws f. pture use values, shedding no light on. on-use values which couldbe much larger, at least in princ.
The travel cost method is used to estimate economic use values associated with ecosystems or sites that are used for recreation. The method can be used to estimate the economic benefits or costs resulting from: changes in access costs for a recreational site. elimination of an existing recreational site. addition of a new recreational site.
The travel costs method was first applied in the US in 1959 to value the recreational use of nature. There are basically two different types of travel cost methods; one based on a valuation of a single site and one based on choices between multiple sites. In this overview the use and requirements for these two methods are described separately.
The Travel Cost Method (TCM) has been employed to derive the demand model, whilst the concept of consumer surplus was used for value determination and comparison. The findings showed that the ...
travel time - Assume Zone 0 = zero travel distance and time - Multiply average travel distance for each zone by standard cost per mile (£0.3 per mile) - Multiply average travel time for each zone by the cost of time (e.g. average hourly rate, £9/hour or £0.15/minute) - Add travel and time cost together
The travel cost model (TCM) of recreation demand is a survey-based method that was developed to estimate the recreation-based use value of natural resource systems. The TCM may be used to estimate the value of. changes in the quality of recreation sites or natural resources systems (Freeman 2003).
Download PDF. Tiffany A. Legg ORCID: orcid.org ... A methodological approach to evaluate the value of EE is the travel cost method (TCM), which is a non-market valuation method in the field of environmental economics that uses travel data to determine what individuals are willing to pay to access a site of interest. Few studies have addressed ...
PDF | On Nov 4, 2018, Leh and others published Measuring Recreational Value Using Travel Cost Method (TCM): A Number of Issues and Limitations | Find, read and cite all the research you need on ...
The travel cost method is a well-known and developed method-ology for measuring the economic values of outdoor recreation benefits (16-18). Although the travel cost method may have its difficulties (19, 20), the method has the advantage that it infers values from people's behavior. It is the very fact that people are
The Travel Cost Method is a very useful tool to apply to assess the non-market value of a particular area or activity. However, it is best applied to an existing area of activity. It is also very expensive to undertake a survey. It is probably best applied when looking to justify application of further resources to an area of activity.
The travel cost method has fundamentally been developed along two lines: the zonal travel cost method and the individual travel cost method. The former was applied by Clawson and Knetsch (1966), who assumed that users would react to an admittance fee as if it were an increase in the cost of travel. In the zonal travel cost method, a
ethodsIntroductionThe travel cost methods (TCM) is based on the observation that recreational services can only be realised through physic. l access to nature. This implies that individuals seeking to enjoy the service will need to spend resources (time and money) to. travel to the site. The travel activity is a reflection of the use value this se.
The design of this work is to estimate the recreational value and to establish functional relationship between travel cost and visitation of Lawachara National Park (LNP) in Bangladesh. This study employed zonal approach of the travel cost method. The work is grounded on a sample of 422 visitors of the LNP. Results showed that the total value ...
2.1 The Travel Cost Method. The individual travel cost method treats trips to a site as the quantity demanded, while the cost of the trip as the price of access to the site. These assumptions result in a demand function of the following form: ri = f pi, i , (5) where r. i is the number of trips taken by individual i to a given site during a ...
tation rate on travel cost, one could predict how that rate would fall with travel cost and, in turn, infer an aggregate demand function. The zonal model ruled for the first decade oftheTCM'sexistence (Clawson andKnetsch1969;TriceandWood1958). Although the zonal method sees some use in current practice (Moeltner 2003), in
The travel-cost method (TCM) is used for calculating economic values of environmental goods. Unlike the contingent valuation method, TCM can only estimate use value of an environmental good or service. It is mainly applied for determining economic values of sites that are used for recreation, such as national parks. For example, TCM can ...
The travel cost method, based on welfare estimates typically from preferences revealed in survey responses, is the most well-established and commonly used method for the valuation of recreational ...
Travel Cost Method (TCM) approach, the economic value of a tourism location can be determined even though the attributes of that tourism site are based on recreational features. The concept of economic determination of a tourism location based on Travel Cost Method (TCM) is by the use of individual's travel cost data as a proxy for the ...
The treatment of the opportunity cost of travel time in travel cost models has been an area of research interest for many decades. Our analysis develops a methodology to combine the travel distance and travel time data with respondent-specific estimates of the value of travel time savings (VTTS). The individual VTTS are elicited with the use of discrete choice stated preference methods. The ...
The travel cost method (TCM) has widely been used for the estimation of recreational sites globally (see- Solikin et al. 2019;Ortega et al. 2018;Muryani and Prabugati 2016;Islam and Majumder 2015 ...
The travel-cost method is used to evaluate the demand for hunting trips in Kansas. In contrast to earlier studies, time spent on-site for other recreational activities is explicitly included in the empirical analysis. The demand for hunting trips falls as cost rises.